Introduction:
The capacitors are non-inductively wound with ametallized polyester film dielectric/electrode, encapsulated in flameretardant(UL94, V-O) plastic case and epoxy resin end seal.
Used in fans, air-conditioners, refrigerators, PowerSystems (UPS), office equipment, mercury lamps, fluorescent lamps and businessmachines.
Specifications and dimension:
1.Base Specification：
(a) IEC 33 (C0)77：Usedfor AC motor application
(b) JIS C 4908：Used for electricalapparatus
(C) CNS 4327：Used for electricalapparatus
2.Climate Category：Inaccordance with DIN40040 HSF
(a)H=Minimum Limit Temperature：-25℃
(b)S=Maximum Limit Temperature：+85℃
(c)F=Humidity Category：Averagerelative humidity≦75%, 95% for 30 days per year,continuously；85% for the remaining days, occasionally.
3.Rated Voltage：250, 300, 350, 400, 450VAC
4.Capacitance Range：3μ F ~ 50 μF
5.Capacitance Tolerance：U(-5%~ +10%), J ( ± 5 % ), K (±10 % )
6.Withstand Voltage：
(a)Between Terminals：R.V.×√2× 175% for 1 minute（VDC）.
(b)Between Terminals and Case：2×Rated voltage ＋1000V(1500V Min) for60s.This test occasional self-healing breakdown is allowed.
7.Dissipation Factor：0.1%at 200V.AC, 60Hz and 25°C
